Altimium SCA51T, Руководство пользователя

Страница: 16 / 48

Compact Scaler Switcher (with PoC)
Altimium 11 www.altimium.com
4. System Operations
4.1 Operations of Front Panel Buttons
Front panel buttons can be used for output resolution adjusting, switching operations,
software updating, volume adjusting and other operations in menus.
4.1.1 Resolution Adjusting
Resolution supports auto-adjusting and manual-adjusting. Press and hold for
RESO/AUTO button for 7 seconds or more to switch between auto-adjusting/
manual-adjusting mode.
Note:
1. In auto-adjusting mode, SCA51T will choose the resolution of the display device at
the far-end as the preferred resolution.
If you need to choose the resolution of local HDMI display device:

Cut off the power of SCA51T and disconnect SCA51T and TP402PR.

Turn on the power of SCA51T.

Gets the resolution of local HDMI output device.

Connect TP402PR to SCA51T.
2. In auto-switching mode, front panel button control is not available, but IR and RS232
control are able to switch modes.
4.1.2 Switching Operations
Video signals support auto-switching and manual-switching. Press and hold for
SOURCE/AUTO button for 7 seconds or more to enter in auto-switching/
manual-switching mode.
The display result is showed as below:
The display result will be showed for 2 seconds .
The auto-switching mode abides by the following principles:

New input principle
Once detecting a new input signal, SCA51T would switch to this new signal
automatically.

Power rebooting principle
IN: HDMI1 AUTO
1280 X 720
IN: HDMI1 MANUAL
1280 X 720
Auto-switching function