Alternate Heating COAL GUN S130, Инструкция по установке и эксплуатации

Страница: 65 / 66

- 59 -
Note: The above illustrates one possible method of connecting the Coal Gun™ with an existing boiler. This
connection is as follows: using a small circulator (and with the backup boiler piped into the return tapping)
run another pipe from the supply tapping T, of the Coal Gun to the supply line, of the existing boiler on the
lower side of the flow control valve. A minimum of 1'' diameter pipe should be used for this connection on the
model S130. The pipe size must be determined by taking into account the distance involved and flow required.
The new circulator should be wired to the power for the Coal Gun. When power to the Coal Gun is on, the
circulator should be running. An alternate option is to attach a strap on aquastat on the Coal Gun supply line
that closes on temperature rise. This will automatically activate the pump at a given temperature. The add-on
boiler shall be installed without interfering with the normal delivery of heated water from the original boiler.
The add-on boiler shall be installed without affecting the operation of the electrical and mechanical safety
controls of the original boiler.