AlterG Anti-Gravity Treadmill Via 400 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 56

AlterG Anti-Gravity Treadmill Via 400 Скачать руководство пользователя страница 5

D-000348 Rev. A

5

User Responsibility

The AlterG

®

Anti-Gravity Treadmill

®

Via400 will perform as described in this Operation Manual

and by accompanying labels and/or inserts when it is assembled, operated, maintained and
repaired in accordance with the instructions provided. A defective Via system should not be
used. Parts that are broken, missing, plainly worn, distorted or contaminated should be replaced
immediately. Should such repair or replacement become necessary, it is recommended that a
request for service be made to AlterG, Inc. The Via400 Anti-Gravity Treadmill, or any of its
parts, should only be repaired in accordance with instructions provided by AlterG, Inc., certified
AlterG, Inc. technicians, or by AlterG, Inc. trained personnel. The Via400 Anti-Gravity Treadmill
must not be altered without the prior written approval of the AlterG, Inc. Quality Assurance
Department.

The user of this product shall bear the sole responsibility for any malfunction, which results from
improper use, faulty maintenance, improper repair, damage, or alteration by anyone other than
AlterG, Inc. authorized representatives.

Any unauthorized maintenance; repairs or equipment modification activities may void the
Via400 Product Warranty.

«
...
3
4
5
6
7
...
»

Содержание Anti-Gravity Treadmill Via 400

























































Отзывы:

Нет отзывов