Altera DE5-NET, Руководство пользователя

Страница: 14 / 26

DE5-Net User Manual www.terasic.com
June 20, 2018
13

Setup Configure Mode Control DIP switch
The Configure Mode Control DIP switch (SW6) is provided to specify the configuration mode of
the FPGA. As currently only one mode is supported, please set all positions as shown in
9
Figure 2-3 .
Figure 2-3 6-Position DIP switch for Configure Mode

Select Flash Image for Configuration
The Image Select DIP switch (SW5) is provided to specify the image for configuration of the FPGA.
Setting Position 2 of SW5 to high (right) specifies the default factory image to be loaded, as shown
in Figure 2-4 . Setting Position 2 of SW5 to low (left) specifies the DE5-Net to load a user-defined
image, as shown in
1
Figure 2-5 .