manualshive.com logo in svg

Altendorf F45 ProDrive, Руководство по эксплуатации

Поделиться
Скачать
Altendorf F45 ProDrive Скачать руководство пользователя страница 87

   Operating

87

0000010038-003- GB

Operating

The stop fence of the rip fence can be adjusted in the cutting direction and to 
the profile height. Clamp it in the required position with the top eccentric lever.

For crosscutting short workpieces and for recessing or other work cycles during 
which offcuts can become jammed between the stop and the saw blade, the 
stop fence is moved forward until its rear end is in front of the saw blade.

The stop fence is moved into the flat position when cutting flat and narrow 
workpieces. This means there is more space for workpiece guidance and the 
fence can be moved closer to the saw blade, in particular when the saw blade 
is tilted, without hitting the protection hood.

Fig. 6-7

 

Flat position of the stop fence

Warning!

Danger of injury!

When cutting widths of less than 120 mm, make sure that the material is 
fed with a push stick and that the stop fence is laid flat.

Содержание F45 ProDrive
















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды