Altendorf F45 ProDrive, Руководство по эксплуатации

Страница: 30 / 207

Product description
30
Product description 0000010038-003- GB
• Remove any loose parts from the vicinity of the saw blade before switching
on the machine.
• Only start cutting when the saw blade has reached its full rotational speed.
• Always use the top protection hood!
• Adjust the height of the top protection hood to the thickness of the workpi-
ece to be cut. When operating with a tilted saw blade, exchange the narrow
hood for a wide hood. For machines with the option "Saw blade tilting to
both sides", move the protective hood to the respective work position by
pushing it to the correct side!
• Always guide the workpiece safely and use the appropriate stops/fences.
• Use a push stick when cutting narrow workpieces (< 120 mm) at the rip
fence.
• Crosscuts and longitudinal cuts in round wood are not permitted with the
standard feeding aids or fences/stops.
• Always use the riving knife except for insert cuts. The riving knife must not
be thicker than the cutting line width or thinner than the main blade. Adjust
it so that it is at a distance of least 3 mm and at most 8 mm from the gear
rim. The guide slot must be 13 + 0.5 mm wide. The riving knives supplied
with the machine cover the entire range of permitted saw blade diameters –
from 250 mm to 550 mm. With respect to their thickness, they match the
cutting line widths of commercially available tungsten carbide tipped saw
blades. If other saw blades, e.g. made of chrome vanadium (CV), are used,
select a riving knife thickness that lies between the cutting line width and
the main blade thickness. Such riving knifes can be obtained from the trade
or directly from ALTENDORF.
• Use an anti-kick device for insert cuts, e.g. the front of the clamping shoe.
Fix this in the sliding table groove, ensuring that the sliding table is locked
with its interlock to prevent movement. Following insert cutting, immedia-
tely refit the riving knife and the top protection hood immediately!
• Only do angle cuts when the cross-slide is fixed to the sliding table. Make
sure that small cut-off workpieces cannot be taken up by the gear rim and
kick out, for example by using a deflection wedge.
• For trimming, use the clamping shoe fixed to the sliding table to hold down
the workpiece.
• When using a feeding unit, use at least the riving knife as an anti-kick
device.
• Replace worn-out table strips immediately.
• Wobble units or wobble cutting devices are not allowed to be used.
• The sound pressure level at the workplace generally exceeds 85 dB(A).
For this reason, wear hearing protection when working.
• Only qualified electricians are permitted to work on the electrical equipment
of the machine.