manualshive.com logo in svg

Altendorf F45 ProDrive, Руководство по эксплуатации

Поделиться
Скачать
Altendorf F45 ProDrive Скачать руководство пользователя страница 206

   Maintenance and repairs

206

Maintenance and repairs

0000010038-003- GB

10

Maintenance and repairs

10.1

General

Keeping a supply of the most important spare and wear parts on site is an im-
portant prerequisite for the constant functioning and operating capability of the 
sliding table saw. We only accept a guarantee for original spare parts supplied 
by us. We expressly point out that original spare parts and accessories not sup-
plied by us have not been checked and released by us. Therefore, the fitting 
and/or use of such products may negatively influence the properties of the sli-
ding table saw and thus impair its active and/or passive safety. Wilhelm Alten-
dorf GmbH&Co. KG will not accept any liability or guarantee for damage 
resulting from the use of non-original spare parts and accessories.

Please note that special production and delivery specifications exist for our own 
and our suppliers' parts, and that we always supply spare parts that meet the 
latest state of the art and comply with the latest statutory regulations.

Please refer to the spare parts list when ordering spare parts.

For further information please refer to the spare parts drawings included in the 
spare parts list.

When ordering spare parts, please state the following information:

•

Machine no.

•

Article no.

Содержание F45 ProDrive
















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды