30
+31(0)78 - 615 20 33
[email protected]
www.altec.nl
+32(0)2 - 270 34 88
[email protected]
www.altec.be
NL
BE
Static IP
3C
Configure
4C
Choose Static IP
5C
Set IP Address
6C
Set Subnet mask
7C
Set Default gateway
8C
Yes
- Set static IP
4.4.3
Diagnostics
Print configuration
This feature is used to print the current printer configuration on the media.
Please use media with a minimum width of 50mm (preferably 100mm).
1
Diagnostic
2
Print configuration
3
Printing
The printout contains the following information
System information
•
Model
•
Firmware
•
Checksum
•
S/N
•
TCF
•
Date
•
Time
•
TPH
•
CUT
Model name
Firmware version
Firmware checksum
Printer serial number
Configuration file
System date
System time
Printed mileage
Cutting counter
Printing settings
•
Speed
•
Density
•
Width/Height
•
Gap
•
Intension
•
Codepage
•
Country
Print speed (inch/s)
Printing temperature
Media size
Gap distance
Sensor intension
Code page
Country code
ZPL setting information
•
Darkness
•
Speed
•
Width
•
Tilde
•
Caret
•
Delimiter
•
Power up
•
Head close
Print darkness
Print speed (inch/s)
Media size
Control prefix
Format prefix
Delimiter prefix
Power up motion
Head close motion
Connection information
•
RS-232
•
Ethernet
Baud, Parity, Data bit, Stop bit
Name, MAC-address, IP-
address, Subnet, Gateway, Port
Memory information
•
DRAM
•
FLASH
Numbers of download files +
total and available memory
space
