41
+31(0)78 - 615 20 33
[email protected]
www.altec.nl
+32(0)2 - 270 34 88
[email protected]
www.altec.be
NL
BE
Calibration
Change calibration settings
Advanced settings for the sensor intension and sensor reference.
Serial
Port settings for serial connection (RS232)
Port settings for the RS232 serial port
•
Baud rate
•
Data bits
•
Parity
•
Stop bit(s)
Network
Apply network settings
Printer Name
MAC Address
IP Address
DNS Server
Host name of the printer
Static value (can’t be changed)
DHCP
Dynamic (auto)
Static IP
Set IP Address, Subnet Mask and
Default Gateway
Please do not change this setting.
Note:
Changes may have effect on the web interface.
Please Enter the (new) IP address again in your
browser.
