Altec ATP-23, Руководство пользователя

Страница: 10 / 29

10
6.
Use “Diagnostic Tool” to set the media sensor type and calibrate the selected sensor. (Start the
“
Sensor” button)
Note:
* Please calibrate the gap/black mark sensor when changing media.
3.2.2 Loading Media in Peel-off Mode (Option)
1. Refer to section 3.2.1 to load the media.
2. Open the top cover and peel-off panel after calibrated the sensor.
3. Lead the media through the backing paper opening, beneath the peel-off roller.
4. Push the peel-off panel back to the printer.