Altec ATP-23, Руководство пользователя

Страница: 11 / 29

11
5. Close the top cover gently.
6. Press the FEED button to test.
Note:
Please calibrate the gap/black mark sensor when changing media.
3.2.3 Loading Media in Cutter Mode (Option)
1. Refer to section 3.2.1 to load the media.
2. Lead the media through the cutter paper opening.
3. Close the top cover gently.
4. Use
“Diagnostic Tool” to set the media sensor type and calibrate the selected sensor. (Start the
Sensor” button)