ALTEC AIR, LLC
P550W Series Air Dryers User’s Guide
Page 29 of 98
P011658 – Rev. S
8.5.6
High Compressor Last Run Time Alarm –
Occurs when the compressor
takes longer to pressurize the
air tank than the set point for
the alarm. (Default setting is
3:00 minutes)
See section 13.17 for troubleshooting information.
8.5.7
Compressor Total Hour Alarm –
Occurs when the compressor
has reached an 8,000 hour
maintenance interval. Perform
the required maintenance.
See section 10.3 for maintenance information.
8.6 Accessing the Setup Menu
The P550W has three (3) Setup sections:
System Setup
– Used to set specific values for the system.
Alarm Setup
– Used to set the alarm thresholds for specific readings.
Once the threshold is reached (or exceeded) this results in an alarm. Each
of these thresholds is factory programmed with a default value. Many of
can be modified to levels based upon your specific application.
Network Setup
– Used to configure network settings including the IP
Address, Subnet Mask, Gateway Address, and Keyword.
NOTE
: Reference Appendix Section 14.2 for Limits, Defaults, and Formats.
