ALTEC AIR, LLC
P550W Series Air Dryers User’s Guide
Page 12 of 98
P011658 – Rev. S
6.2 Before You Begin
6.2.1
Carefully inspect the unit, including the shipping box as well as the air
Dryer, for ANY DAMAGE CAUSED BY SHIPPING. If any shipping
damage is detected, it is important to file a claim with the shipping
company prior to continuing the installation procedures.
6.2.2
Read the entire
Installing Your Dryer
section to familiarize yourself with
the components and procedures before performing the air Dryer installation.
6.2.3
Verify the installation location of the air Dryer:
6.2.3.1
Well ventilated and free from abrasive dust or chemicals.
6.2.3.2
Ambient temperature is between 40° to 85° F (4.4° and 30°C).
NOTE:
Higher temperatures will decrease component lifespan.
6.2.3.3
Meets the following power requirements:
110 - 125 VAC for P550W, P550WH and P550WLP models
208 - 253 VAC, 1 Phase for P552W, P552WH and P552WLP models
All models require 50/60 Hz and minimum 15 amp service
6.2.4
Notify the alarm center of the installation and potential for alarms during
the process (as necessary).
IMPORTANT!
Performing procedures not described in this User’s Guide or
installing components not supplied by ALTEC AIR is NOT
RECOMMENDED AND MAY VOID THE WARRANTY.
