ALTAS AUTO NOVUS Cityline, Руководство по эксплуатации

Страница: 5 / 63

5 | P a g e
Drive selector.
Display board
control panel
(
see below for
possible
options
).
* Located in the lowered section below the folding passenger seats.
** Located in the lowered section below the single passenger seat.
NOTE
Number of knobs and buttons vary depending on the bus specification.
HANOVER display board control panel
The four keys are all that is required to access the database and carry out all
controller functions. All driver information is shown on the OLED display.
OLED Display
Left Arrow Key
Function/Entry
Key
The F/E key is a Function & Entry key. Use it to select function.
The Left arrow key has a dual function. 1 Selecting the next entry digit. 2
Back button for options behind the lock code.
Each press of the
up Arrow key increases this code digit’s value by 1.
Each press of the
down Arrow key decreases this code digit’s value by 1.
The USB Data Port is used to update the DG3 database and Firmware.
NOTE Refer to the DG3 Controller Quick Start Manual for more information
and instructions how to configure the USB stick for loading.
Up Arrow Key
Down Arrow Key
Data Port (USB)