Altai Technologies Ltd. All rights reserved
Altai A2n WiFi Access Point/Bridge Web-Admin Configuration Manual
TPS13-001_rev1.0
Preferred AP0 Mac
: The station shall be able to input the 3 preferred AP (WDS) MAC
Addresses, in the order of priority.
Preferred AP1 Mac
: The station shall be able to input the 3 preferred AP (WDS) MAC
Addresses, in the order of priority.
Preferred AP2 Mac
: The station shall be able to input the 3 preferred AP (WDS) MAC
Addresses, in the order of priority.
Enable Roaming
: Enabled or disabled roaming.
Minimum signal for association
: By default, it is 0dB, and if an associated station UL
SNR drops below X by Y dB, for a consecutive number of Z packets, this station shall
be disassociated by the AP.
Disconnect Signal Threshold
: By default, it is 10dB.
Disconnect Packet Threshold
: By default, it is 10 packets.
5.3.2.3.2.
Station Security
A2n 5GHz supports Open, Shared Key, WPA, WPA-PSK, WPA2, WPA2-PSK, WAPI, WAPI-
PSK authentication mode, and Disabled, WEP, AES, TKIP, SMS4 cipher mode.
Select
Configuration
->
Wireless
->
Radio1 (5G)
->
Station
to edit “
More…
” then select
WLAN
Security
to access to security configuration page.
Figure 5-58 5G Station security setting
Note: Please refer to 6.3.1.2.2. Section about the 2.4G AP Mode WLAN security setting
5.3.2.4.
5G General setting — Repeater Mode
Select
Configuration
->
Wireless
->
Radio1
(
5G
), and then select “Repeater” for Radio
Mode.
