Altai Technologies Ltd. All rights reserved
Altai A2n WiFi Access Point/Bridge Web-Admin Configuration Manual
TPS13-001_rev1.0
EXT1
：
Chain 1 Noise Floor of the Extension Channel (i.e the +/- channel of the HT40)
Interference
Mitigation
Offset
(
0-50dB)
：
This option will mask all noise / valid signal
below "0-50" dB.
4.2.1.4.
WLAN
Please select
Status
->
Interface
->
Radio0 (2.4G)
->
WLAN
to check Radio0 (2.4G)
wireless network information including: Device ID, WLAN ID, SSID, MAC Address, Auth
Mode, Unicast Cipher, Multicast Cipher, Num of Station, Throughput
（
TX/RX
）
, Traffic
(Tx/Rx) and State.
When you enable a WLAN, you can find its relevant information in “State”.
Figure 4-7 WLAN information
Device Id
：
2.4G interface ID
WLAN
：
Wireless network number
SSID
：
A2n default SSID is Superwifi Network x (x is from 0 to 15)
MAC Address
：
2.4G wireless network MAC address (BSSID)
Auth Mode
：
Authentication mode for each wireless network
Unicast Cipher
：
Unicast cipher mode for each wireless network
Multicast Cipher
：
Multicast cipher mode for each wireless network
Num of Station
：
Associated client number
Throughput
（
Tx/Rx
）：
Real Throughput of transmitted and received packets for each
wireless network
Traffic (Tx/Rx)
：
Download and Upload packets for each wireless network
State
：
Wireless network state
4.2.1.5.
Association List
Please select
Status
->
Interface
->
Radio0 (2.4G)
->
Association
List
to get associated
