Altai Technologies Ltd. All rights reserved
Altai A2n WiFi Access Point/Bridge Web-Admin Configuration Manual
TPS13-001_rev1.0
Access Traffic Right
:
Access traffic right controls associated stations the ability to
permit or deny AP management.
Max
Clients
:
Maximum value is 256
Back
to
Overview
:
Go back to previous page
Procedures:
1.
Select
Configuration
->
Wireless
->
Radio1 (5G)
->
WLAN
to edit “
More…
” WLAN,
and then select
WLAN
General
.
2.
Enable
WLAN
select to enable this WLAN
3.
VLAN
Pass
Through
allow or don’t allow VLAN pass through
4.
VLAN
TagId
Set VLAN ID
5.
SSID
set SSID
6.
Enable
Intra
-
WLAN
Forwarding
: Allow or block
7.
Max
Clients
Maximum is 256
8.
Click
Submit
9.
Click
Save&Apply
to apply
5.3.2.2.2.
WLAN X (0-15) Security
A2n 5GHz supports Open, Shared Key, WPA, WPA-PSK, WPA2, WPA2-PSK, WAPI, WAPI-
PSK authentication mode, and Disabled, WEP, AES, TKIP, SMS4 cipher mode.
Select
Configuration
->
Wireless
->
Radio1 (5G)
->
WLAN
to select “
More…
” WLAN,
and then select
WLAN
Security
to access to security configuration page.
Figure 5-52 5G AP Mode WLAN Security setting
Note: Please refer to 6.4.1.5 WLAN security setting