• Raise and lower the shade several times.
• If the length is incorrect or the bottom rail is not level, use the following steps to correct.
BOTTOMRAIL SHADE ADJUSTMENT
1. Lift bottomrail on the side to be adjusted. This will take the weight off the cord.
2. Use a screwdriver or dime.
• Turn screw clockwise to lift that side of the shade.
• Turn screw counter clockwise to lower that side of the shade.
• Half a revolution is 1/4” adjustment (maximum adjustment is 1/2”).
6
First, lower the blind to rest the bottomrail on the window sill. Then, press or gently hammer the
hold-down brackets into the holes on both sides of the bottomrail. With the hold-downs attached,
mark the desired bracket locations on the mounting surface. Finally, making sure the brackets
are level, install the hold-downs using the two screws provided.
Hold-Down Brackets (optional)
Immediately remove this product if a cord longer than 22 cm or a loop
exceeding 44 cm around becomes accessible.
Rev 7/21 Print 7/21
WARNING
RISQUE D’ÉTRANGLEMENT–
Les enfants en bas âge
MISE EN GARDE
peuvent s’étrangler
avec des cordes. Enlevez imm
é
diatement ce produit si une
corde mesurant plus de 22 cm devient accessible ou si le contour d’une boucle de
plus de 44 cm devient accessible.
STRANGULATION HAZARD –
Young
chidren can be strangled by cords.
Lower Shade Side
Lift Shade Side
Adjusting the Shade
CHILD SAFETY
