For inside mounts the installation brackets will be screwed in place through the top two holes of each bracket.
Refer to the mounting depth chart:
NOTE:
Prior to mounting the brackets, add any clearance depth required to avoid obstructions such as window cranks or handles.
ATTACH THE BRACKETS:
1. Screw installation brackets through top two holes to desired window sill location.
• Use a 3/32” drill bit to drill holes for the screws.
2. Ensure all brackets are level and aligned.
IMPORTANT:
If you are fastening the installation brackets to drywall, be sure to use wall anchors
and follow the instructions provided with the anchors. (Anchors not provided.)
For outside mounts the standard installation brackets will be screwed in place through the two back holes of each bracket.
Refer to the minimum surface height chart:
ATTACH THE BRACKETS:
1. Screw standard brackets through two back holes to desired location.
• Use a 3/32” drill bit to drill holes for the screws.
2. Ensure all brackets are level and aligned.
IMPORTANT:
If you are fastening the installation brackets to drywall, be sure to use wall anchors
and follow the instructions provided with the anchors. (Anchors not provided.)
EXTENSION BRACKETS (optional):
1. Position the extension brackets to the desired wall location.
2. The bracket tops must be aligned and level to one another.
3. Mount the extension brackets through the back holes with two screws.
4. Attach installation brackets to extension brackets with included screws & nuts.
NOTE:
Use the same holes for all brackets to ensure even projection from the surface.
SIDE MOUNT WITH EXTENSION BRACKETS (optional):
Important:
Not available with all operating systems.
1. Measure from window sill up to desired mounting position on each side of the window frame.
2. Mark position.
3. Mount Exten
sion Brackets on each side of window frame, as shown. Make sure to confirm
that the headrail will sit perfectly level.
4. Once the Extension Brackets are installed and properly positioned, attach the mounting
brackets using the nuts and bolts provided.
3
Nut
Extension
Bracket
Mounting
Bracket
Bolt
Minimum Depth
Fully Recessed
3/4”
2-1/8”
Minimum Height
1-1/2”
Inside Mount
Outside Mount
