manualshive.com logo in svg

Alstom iSTAT M355, Руководство пользователя, Страница: 33 / 154

Поделиться
Скачать
Alstom iSTAT M355 Скачать руководство пользователя страница 33

User Manual 

M3x5/EN M/B

 
iSTAT M3x5 

 

Page 31

 

 

8.10  Memory Card 

The 

M3x5

 family have a Memory Card slot located on the front display where the Memory 

Card is inserted, see figure 8-1. Section 11 describes the operation of the Memory Card.  

The Memory card slot on 

M3x5

 will accept a full size SD Card or MultiMediaCard (MMC) 

with card memory sizes up to 2GB supported. 

The Memory Card is only used for transferring data; it cannot be used as an extension to the 
logging memory of the Meter.  Therefore the Memory Card should not be left in the slot in the 
Meter and the slot cover should be fitted to prevent ingress of moisture and dust. 

The Memory card can be used to load the 

M3x5

 settings and to extract records.  This means 

that the settings can be made off line using 

QDSP2

 and then loaded on to the product 

without needing communications. 

The options available for the Memory card are fully described in section 11: Memory Card 
Status, Save Data, Load Settings and Software Update.  

Memory Card Status

: the 

M3x5

 can check the status of the Memory card ensuring that it is 

correctly located in the front slot and that it can be read from and written to. 

Save Data:

 The data from the recording functions, data logger or Power Quality recorder, 

can be saved to the Memory Card for off line analysis with the 

QDSP2 

software.   

Load Settings:

 the settings for the 

M3x5

 are compiled in 

QDSP2

 using the .msf file suffix. 

This file can be saved on a computer or onto the Memory Card. The Memory card is then 
inserted into the 

M3x5

 and these settings loaded into the 

M3x5

. Using the memory card 

many devices can be programmed quickly with identical settings.  The 

M3x5

 will only load 

the appropriate .msf file so that the settings from one meter cannot be inadvertently loaded 
into another inappropriate meter. 

Software Update

: 

QDSP2 

has an upgrade function for the 

M3x5

 firmware. This firmware 

can be saved onto the Memory Card and then transferred to the 

M3x5

 so that the meter 

firmware can be upgraded.  This can be performed fastest by using the memory card.  New 
firmware should be transferred to a memory card from the computer once, and then multiple 
devices can be updated only using the memory card. 

PLEASE NOTE 

Measurements cannot be directly recorded to a memory card. Only data previously stored in 
internal memory can be transferred to a memory card. 

 

CAUTION 

During firmware update the auxiliary power supply 

must not

 be interrupted. 

 

Содержание iSTAT M355



























































































































































Отзывы:

Нет отзывов