E32.0.93.6C-02 Manual for connection and operation of the JDI-22 page 8 of 10
6. Min-/max-value memory:
The device features a minimum/maximum-value memory. In this memory the highest and lowest performance
data is saved.
Calling of the minimum-value
press button 3 shortly
the device will display “Lo“ briefly, after that
the min-value is displayed for about 2 sec.
Calling of the maximum-value press button 2 shortly
the device will display “Hi“ briefly, after that
the max-value is displayed for about 2 sec.
Erasing of the min/max values press button 2 and 3 for 2 sec.
The device will display “CLr“ briefly, after
that the min/max-values are set to the cur-
rent displayed value.
7. Serial interface:
The serial interface allows the device to communicate with a host computer. Data polling and data transfer is
done in master/slave mode, so the device will only send data on demand. Every device has a unique ID-
number that makes exact identification of each device possible. With the help of a software (like EbxKonfig –
freeware version available via internet on alre.de) you are able to reassign an address to the device.
Additional accessories needed for the interface mode:
- Level converter device interface
!
PC:
e.g. EBW1
- Software for communication with the device
EBS9M:
9-channel-software for displaying a measured value.
EASYCONTROL: multi-channel software for real-time-recording and displaying measure-values of a de-
vice in ACCESS®-database-format.
