Alpinion Medical Systems X-CUBE 70, Быстрое руководство

Страница: 26 / 125

1-12 Getng gtarted
Control
Control Name Description
Set/Cur
Set or Cursor function may be assigned to these keys. The
function for each key can be assigned in Utility > Setup >
SystemPreset > System > Control Panel > Key > Set the
Cursor and Set Keys .
•
Set : gelect an item or value using the trackball.
•
Cursor : Display the cursor on the screen.
Body Pattern
Activate the annotation function in order to add body
patterns to an image.
Text
Activate the annotation function in order to type text on
an image.
Caliper
gtart basic measurements such as distance, circumference,
area, and volume.
Measure
gtart measurements by application.
Priority
Adjust the priority of Trackball.
• In 2D mode, press to select the priority between the
width and tilt functions.
•
In Duplex or Triplex mode, press to select the priority
between ROIs of the activated imaging modes.
Single, Dual,
Quad
View an image in dual or quad screen.
P1, P2, P3, P4
Control the designated recording device or perform
alternative storage. To configure these keys, go to Utility >
Setup > SystemPreset > User Setting > Print/Foot Switch .
Freeze Pause and resume scanning.
User-Defined
Key (U7)
You can use this control as an user-defined hard key. The
function for the key can be assigned in Utility > Setup >
SystemPreset > User Setting > User Defined Key .
TIPS
• Exit : Exit current screen (mode) and return to the
previous screen (mode).
• End Exam : End the current study and store patient
and measurement data and clear all temporary
data.