background image

Types of Precautions

Forbidden

Indicates actions that are 

forbidden (must not be performed)

Forbidden

Indicates that disassembly is 

forbidden. 

Mandatory

Indicates actions that are 

mandatory (must be performed)

Marks content that should receive 

your full attention. 

 Warning

Do not disassemble or modify the product.

Doing so could lead to an accident 

fi

re or 

electric shock.

Store screws and other small objects 

where small children cannot reach them. 

If one of these small objects is swal -

lowed, consult with a doctor immediately.

When replacing fuses, be sure to

use fueses with the speci

fi

ed current 

rating. Failing to do so could lead to

an accident or 

fi

re.  

Only connect the product to a 12 VDC 

negative ground car. Failing to do so could

lead to an accident or 

fi

re.  

Before you begin wiring, remove the 

ground wire from the negative terminal of 

the battery. Failing to do so could lead to 

electric shock or injury.

Do not cut the insulation on a cord and take 

power from another device. Doing so could

lead to 

fi

re or electric shock.  

Do not install the product in a location 

where it will obstruct the driver’s forward 

view; interfere with the operation of the 

steering wheel, gearshift, or the like; or 

pose a threat to passengers. Doing so could 

lead to an accident or injury.

When making a hole in the vehicle body, be 

careful to avoid damaging pipes, the fuel 

tank, electrical wiring, and the like. This 

kind of damage could lead to an accident

or 

fi

re. 

When installing and grounding the product, 

do not use any of the bolts or nuts of the 

steering wheel, brakes, fuel tank, or the 

like. Doing so could make the brakes stop

working or lead to 

fi

re. 

Do not install the product near the 

passenger-side airbag. Doing so could 

interfere with the operation of the airbag 

and lead to an accident or injury.

Bundle cords so that they don’t interfere 

with driving. Wrapping cords around the 

steering wheel, gearshift, brake pedal, 

or the like, could lead to an accident or 

damage equipment.

 Caution

Connect the product properly according to 

the instructions. Failing to do so could lead

to 

fi

re or an accident. 

Do not sandwich cords between the seat 

railing or allow them to touch protrusions. 

Resulting breaks or shorts could lead to

electric shock or 

fi

re. 

Do not block vents or heat sinks. Doing so

could lead to 

fi

re or damage equipment. 

Use the accessories according to the 

instructions, and attach them securely. 

Failing to do so could lead to an accident 

or damage equipment.

Do not install the product where it may be 

exposed to water or in a place with high 

levels of humidity or dust. Doing so could

lead to 

fi

re or damage equipment. 

The installation and wiring of this product 

requires specialized skills and experience. 

Have the product installed by an Alpine 

authorized dealer.

Forbidden

Forbidden Mandatory

Mandatory

Forbidden

Forbidden

Forbidden

Forbidden

Forbidden

Forbidden

Forbidden

Jeep Wrangler

UNLIMITED JK               • 2/19

Содержание PSS-22WRA




















Отзывы: