7
Route the subwoofer cable and bass level knob
down to the center console.
8
Amplifier Installation (continued)
Route the In/Out audio connections behind the
dash frame to the radio location. Make all the
necessary connections based on your system
configuration see pages 17, 18 or 19.
9
Mount the bass level knob in one of the suggested
locations. Use a drill bit size 9/32”.
10
Route the subwoofer cable across the center
console over to the passenger side seat.
11
Insert the supplied water proof shrink tube into the
Power cable. Connect the female connector on the
power cable to the male connector on the main
harness and shrink the tube using a heat gun.
12
Use a 10mm socket to mount main harness ground
terminal to the OEM chassis ground above the kick
panel.
Jeep Wrangler
UNLIMITED JK • 11/19
