1
Press the tweeter into the tweeter bridge grille
adapter. Observe the tab orientation.
2
Route the tweeter wires through the grille by
removing the wire cover. Ensure the wires do not get
pinched when reinstalling the wire cover.
Rear Sound Bar Speaker Installation 2011 – 2014 Models
3
Route the wire through the notch on the basket, then
press the grille into place. Ensure the wires do not get
pinched.
4
Add foam strip on top of wires in channel.
5
Cut a slit in the center of the polyfill, and pull the
vehicle plug through. then insert the excess polyfill into
the sound bar enclosure.
Note: Installation of polyfill
is needed for optimum sound.
6
Insert Polyfill
Select the (2011-2014) crossover input wires and
connect to the vehicle plug. Connect tweeter
connectors. Secure the crossover.
Note: 2015-2017 input plug is not used.
Do not use
(2015-2017)
2007-2014
Connect the tweeter (-)
to the crossover and
select either:
0db wire
+3db wire
(Increased TW level)
for the tweeter (+) lead
(-)
(+)
(+)
TW level
TW level
+3db
0db
Jeep Wrangler
UNLIMITED JK • 14/19
