5
Check accessory parts.
×
3
×
2
Prepare tools and mounting information.
Screwdriver
Pencil and eraser
Spanner
Pliers
Electrical tape
Park the vehicle in a safe and level location.
Apply the brake and remove the ignition key.
Mount the aerial on the roof.
Clean dust and oil at the mounting location and mount the aerial.
Notes:
•
The magnet of the aerial is very strong. Proceed cautiously to prevent any
damage to the vehicle’s body. Keep the magnet away from articles susceptible
to magnetic fields such as credit cards, watches, etc.
•
Do not paint the aerial. Reception sensitivity may be decreased.
Mounting the aerial inside the vehicle.
1. Clean the mounting location.
2. Put on the aerial mounting plate.
3. Mount the aerial.
Notes:
•
Mount the aerial on a flat plane of the dash board or rear tray.
•
Some thermal reflection type or thermal absorption type glass may interrupt
high frequency waves. If reception is poor with the aerial installed inside the
car, try to mount the aerial outside the car.
Aerial
Aerial
1. Preparation
1
2
3
4
5
Power cables
13P RGB extension cable (6 m)
Remote control
stickers
1
Bracket
5
Flanged self-tapping
screw (M5
×
15)
4
Hex bolt (M6
×
50)
3
Screw with double
washer (M5
×
8)
2
Floor base
One each for left and right
6
Spring
washer (M6)
7
Flanged hex
nut (M6)
8
Wing nut (M6)
9
Velcro
fastener
"
Self-tapping
screw (M4
×
12)
!
Velcro tape
×
2
×
4
×
4
×
4
×
4
×
4
×
4
×
2
×
4
×
2
Battery (AA)
ZOOM
UNGEB.
EIN
AUS
ROUTE
POS.
ZIEL
EING.
MENU
ZURUCK
STIMM
ZOOM
UNGEB.
EIN
AUS
ROUTE
POS.
ZIEL
EING.
MENU
ZURUCK
STIMM
ZOOM
UNGEB.
EIN
AUS
ROUTE
POS.
ZIEL
EING.
MENU
ZURUCK
STIMM
ZOOM
UNGEB.
EIN
AUS
ROUTE
POS.
ZIEL
EING.
MENU
ZURUCK
STIMM
ZOOM
UNGEB.
EIN
AUS
ROUTE
POS.
ZIEL
EING.
MENU
ZURUCK
STIMM
Extension
cables
Remote control
holder
Remote
control
Solderless
connector
Parking brake
aux. cord
Cable clamper
Aerial
mounting plate
GPS aerial
