14
Cut the carpet in "x" shape with a
cutter and insert the floor bases
2
from under side of the carpet.
2
Mount the unit on the carpet with
spring washers (M6)
6
and wing nuts
(M6)
8
.
Continued to
5
Securing leads, etc.
8
6
Securing leads, etc.
Take care wiring leads are not jammed by moving parts such as seat rail etc. and not damaged by touching
protruded objects.
Connect the battery (–) terminal.
4. Confirmation
Turn on the engine key. Make sure
the unit is operating correctly by
referring to the Owner’s Manual.
ON
Make sure the electrical components
attached on the vehicle such as the
brake lamp, stop lamp, etc. work
correctly.
a
Remote control holder mounting method
•
If the remote control is in direct sunlight, remove it
from the holder and keep it in the glove box.
•
When the holder cannot be mounted securely with
double-sided adhesive tape
!
, mount it by using
screws
"
.
Reinforcement screws
"
* Double-sided adhesive tape. (Before putting on the
holder, clean dirt on the mounting location.)
3
4
5
6
1
2
Console box, etc.
!
*
Remote
control
Remote control
holder
Blue Protective
Paper
