background image

2

PRECAUTIONS

GUIIDE FOR INSTALLATION AND CONNECTIONS

FOR AUTHORIZED ALPINE DEALERS

• Please read this GUIDE FOR INSTALLATION

AND CONNECTIONS FOR AUTHORIZED

ALPINE DEALERS and the OWNER’S MANUAL

thoroughly to familiarize yourself with each control

and function. We at ALPINE hope that your new

NVE-N077P will give you many years of

enjoyment.

In case of problems when installing your unit, please

contact your authorized ALPINE dealer.

Points to Observe for Safe Usage

• For safe operation of this system, please read this

manual carefully. We cannot be responsible for

problems resulting from failure to observe the

instructions in this manual.

• Pictorial displays are used to point out safety tips

to prevent harm to yourself or others and property

damage. Here is what these pictorial displays

mean. Knowing them is important to understand

this manual.

• Meaning of displays

BEFORE WIRING, DISCONNECT THE CABLE

FROM THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury

due to electrical shorts.

DO NOT ALLOW CABLES TO BECOME ENTAN-

GLED IN SURROUNDING OBJECTS. Arrange

wiring and cables in compliance with the manual to

prevent obstructions when driving. Cables or wiring

that obstruct or hang up on places such as the

steering wheel, shift lever, brake pedals, etc. can be

extremely hazardous.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to

other equipment. Doing so will exceed the current

carrying capacity of the wire and result in fire or

electric shock.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT

HINDER VEHICLE OPERATION, SUCH AS THE

STEERING WHEEL OR SHIFT LEVER. Doing so

may obstruct forward vision or hamper movement

etc. and results in serious accident.

DO NOT DAMAGE PIPE OR WIRING WHEN

DRILLING HOLES. When drilling holes in the

chassis for installation, take precautions so as not to

contact, damage or obstruct pipes, fuel lines, tanks

or electrical wiring. Failure to take such precautions

may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE

OR STEERING SYSTEMS TO MAKE GROUND

CONNECTIONS. Bolts or nuts used for the brake or

steering systems (or any other safety-related sys-

tem), or tanks should NEVER be used for installa-

tions or ground connections. Using such parts could

disable control of the vehicle and cause fire etc.

DO NOT INSTALL THE MONITOR NEAR THE

PASSENGER SEAT AIR BAG. If the unit is not

installed correctly the air bag may not function

correctly and when triggered the air bag may cause

the monitor to spring upwards causing an accident

and injuries.

MAKE THE CORRECT CONNECTIONS. Failure to

make the proper connections may result in fire or

product damage.

Warning

Warning

Caution

DO NOT DISASSEMBLE OR ALTER. Doing so may

result in an accident, fire or electric shock.

KEEP SMALL OBJECTS SUCH AS BATTERY OUT

OF THE REACH OF CHILDREN. Swallowing them

may result in serious injury. If swallowed, consult a

physician immediately.

USE THE CORRECT AMPERE RATING WHEN

REPLACING FUSES. Failure to do so may result in

fire or electric shock.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE

GROUND. (Check with your dealer if you are not

sure.) Failure to do so may result in fire, etc.

This symbol means important
instructions. Failure to heed them
can result in injury or material
property damage.

This symbol means important
instructions. Failure to heed them
can result in serious injury or
death.

Содержание NVE-N077P















Отзывы: