35
-EN
Setting item: PI SEEK
Setting contents: OFF / AUTO
When OFF is selected, the unit automatically keeps receiving the related
local RDS station.
Setting item: RDS REGIONAL
Setting contents: OFF / ON
You can select one of the patterns of the display languages.
Setting item: PTY LANGUAGE
Setting contents: GB / NL / F / D / I / E
PTY31 (Emergency Broadcast) reception can be set to ON/OFF.
Setting item: PTY31
Setting contents: OFF / ON
•
The unit automatically gives priority to an Emergency Broadcast
whenever it begins, and interrupts the programme you are currently
listening to when PTY31 is set to on.
•
The unit will show “ALARM” in the display during PTY31 reception.
Display Setup Operation
1
Touch
[SETUP]
on the main source screen.
The SETUP selection screen is displayed.
2
Touch
[DISPLAY SETUP]
.
The DISPLAY SETUP screen appears.
3
Touch
[
]
,
[
]
or
[
]
etc., of the desired item to
change its setting.
Setting items:
TILT
*
1
/ VISUAL EQ
*
2
/ DIMMER / DIMMER LOW LEVEL /
BACKGROUND / AUTO BACKGROUND /
DATA DOWNLOAD
*
3
/ BASE COLOR / SCREEN ALIGNMENT
*
1
This function is adjustable while driving.
*
2
When the current source is iPod Audio or USB Audio, you can not
adjust this setting.
*
3
Refer to “Downloading the BACKGROUND data” on page 43.
4
Touch
[
]
to return to the previous screen.
Touch and hold
[
]
for at least 2 seconds to return to the
main source screen that was displayed before the setup
operation was started.
•
Immediately after changing the settings of Display Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF. Otherwise, the settings may not be changed.
PI SEEK Setting
Receiving RDS Regional (Local) Stations
Switching the Display Language of PTY
(Programme Type)
Setting PTY31 (Emergency Broadcast)
Reception
DISPLAY Setup
The Parking Brake must be engaged to access the DISPLAY
mode screen. Attempting to access this screen while driving will
display the warning-CAN’T OPERATE WHILE DRIVING.
The following steps 1 to 4 are common operations to each
“Setting item” of DISPLAY Setup. Refer to each section for
details.
