51
-EN
01GB06IVAD511E.fm
ALPINE IVA-D511E 68-14470Z65-A (EN)
A compatible, external audio processor is operable from this unit when
connected. Some audio processors may require a wired controller. The
explanations below use the PXA-H700/PXA-H701 as an example.
Refer to the operating instructions of the audio processor for more
details.
•
The adjustments or settings performed on the connected audio
processor cannot be operated properly from this unit.
•
The setting “Setting the Speakers”, “Setting Bass Sound Control”,
and “Graphic Equalizer Adjustments” are not available if the
MRA-D550 is connected. Additionally, if the MRA-F350 is
connected, the following setting “Setting the MX mode” is not
available. Also, the setting content differs between the PXA-H700
and PXA-H701.
•
This unit cannot be connected to the PXA-H510 and PXA-H900.
Adjustment Procedure for Dolby
Surround
Make the adjustments described below in order to reproduce Dolby
Digital and DTS sound with greater accuracy.
Adjustment procedure
In case of combining the Automatic adjustments, etc.
We recommend to make the Automatic adjustments before the Dolby
Surround adjustments.
Setting the External Audio Processor
1
Check the Defeat mode is OFF (page 29), and then
touch
[
]
on the main screen.
The SETUP selection screen is displayed.
2
Touch the title bar of Audio Setup.
The Audio Setup screen appears.
3
Touch the title bar of A.Processor.
The A.Processor list screen appears.
4
Touch
[
]
,
[
]
or the title bar of the desired item to
change its setting.
Setting items :
Media Xpander / Bass Sound Cont. / Dolby PLII / Rear Fill /
X-Over / Time Correction / Phase / G-EQ / P-EQ / Speaker Select /
Multi Ch Setup / Speaker Setup / DVD Level / PCM Mode
5
Touch
[
]
to return to the previous screen.
External Audio
Processor Operation
(Optional)
The Parking Brake must be engaged to access the Audio
Processor mode screen. Attempting to access this screen while
driving will display the warning-Can’t operate while driving.
1
2
3
Speaker Setup (page 55)
(Turning the speakers to be used on and off and
setting their response)
Adjusting the speaker levels (page 55)
(Adjusting the signal output level to the various
speakers)
Mixing bass sound to the rear channel
(page 55)
(Achieving smooth sound in the rear seat by mixing
the front audio signals with the rear speaker signals)
4
5
6
7
Following Steps 1 to 5 describe the common procedures for
operating the Audio Processor setting function. For details of
the setting function items, refer to descriptions of respective
items.
Adjusting the acoustic image (page 55)
(Adjusting the acoustic image to achieve a sound as
if the centre speaker were directly in front of the
listener)
Achieving powerful high volume sound
(page 55)
(Achieving energetic sound with even greater power,
like the sound in a movie theater)
Adjusting the DVD Level (page 56)
(Adjust the volume (signal level) in the Dolby Digital,
Pro Logic II, DTS and PCM modes.)
Storing Settings in the Memory (page 56)
(Storing all the settings and adjustments made on the
IVA-D511E (not only the above settings/adjusts) in the
memory)
01GB00IVAD511E.book Page 51 Friday, February 5, 2010 9:49 AM
