37
-EN
01GB05IVAD511E.fm
ALPINE IVA-D511E 68-14470Z65-A (EN)
Display Setup Operation
1
Touch
[
]
on the main screen.
The SETUP selection screen is displayed.
2
Touch the title bar of Display Setup.
The Display Setup screen appears.
3
Touch
[
]
or
[
]
etc., of the desired item to change
its setting.
Setting items:
Tilt
*
1
/ Open/Close
*
1
/ Visual EQ
*
2
/ Dimmer /
Screen Dimmer Level / Function Guide Fade /
Base Color / Screen Alignment
*
1
These functions are adjustable while driving.
*
2
When the current source is iPod Audio or USB Audio, you can not
adjust this setting.
4
Touch
[
]
to return to the previous screen.
•
Touching
[Exit]
will turn off the Display Setup screen, and return to
previous main screen.
•
Immediately after changing the settings of Display Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
Adjust the monitor’s angle (between 40 and 105 degrees) for optimum
visibility.
Setting item: Tilt
Setting range: 10 adjustable angles are available.
•
If the monitor touches an obstacle, remove the obstacle.
•
The screen colour will vary when viewed at certain angles. Adjust the
screen angle for the best viewing position.
•
If the voltage of the vehicle’s battery power is low, the screen may
blink when the screen angle is changed. This is not a malfunction.
Setting item: Open / Close
Setting content: Manual / Full / Close
Backlighting is provided by a fluorescent light built into the liquid
crystal panel. The illumination control adjusts the brightness of the
backlighting based on the car ambient lighting for easier viewing.
Setting item: Dimmer
Setting content: Auto / ON / OFF
•
When ON or Auto is set, the setting is also applied for the button
lighting in “Adjusting the Dimmer of Button Lighting at Night”
(page 41).
•
This setting is also effective for sub-display.
You can adjust the brightness of the backlight (LOW). This function
could be used, for instance, to change the screen brightness while
travelling at night.
Setting item: Screen Dimmer Level
Setting content: –15 to +15
You can adjust the level between MIN (-15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
Display Setup
The Parking Brake must be engaged to access the Display mode
screen. Attempting to access this screen while driving will display
the warning-Can’t operate while driving.
The following steps 1 to 4 are common operations to each
“Setting item” of Display Setup. Refer to each section for
details.
Adjusting the Monitor Angle
Setting Automatic Opening/Closing of the
Monitor
Manual:
The monitor is manually opened or closed by
pressing
OPEN/CLOSE
.
Full:
The monitor automatically opens or closes when the
ignition key is turned to the “ACC” or “ON/OFF”
position.
Close:
The monitor automatically closes when the ignition
key is turned OFF.
Setting the Brightness of the Backlighting
Auto:
Adjust the brightness of the background illumination of
the monitor automatically to the brightness of the car
interior.
ON:
Keep the background illumination of the monitor dark.
OFF:
Deactivate Auto Dimmer mode to keep the background
illumination of the monitor bright.
Adjusting the Minimum Level of Backlight
01GB00IVAD511E.book Page 37 Friday, February 5, 2010 9:49 AM
