Alpine INE-W960A, Руководство пользователя

Страница: 111 / 180

_OM (EN) ALPINE INE-W960A/INE-W960E INE-W960E_OM (EN)
17
2.2.3.7 Elements of the active route
Your software shows the route in the following way:
Symbol Name Description
Current GPS position and
Start point
Your current position displayed on the map. If
roads are near, it is aligned to the nearest road.
Normally if GPS position is available, the route
starts from the current position. If there is no valid
GPS position, your software uses the last known
position as the start point.
Waypoint (intermediate
destination)
An intermediate destination of the route before
reaching the final destination.
Destination (end point) The final destination of the route.
Route colour
The route always stands out with its colour on the
map, both in daytime and in night colour mode.
Streets and roads that are
excluded from the navigation You can choose whether you want to use or
avoid certain road types (page 75). However,
when your software cannot avoid such roads, the
route will include them and it will show them in a
colour that is different from the route colour.
Streets and roads that are
affected by traffic events Road segments may be affected by traffic events
received. These streets and roads are displayed
in an alternate colour, and small symbols
displayed along the route show the type of the
traffic event.
2.2.3.8 Traffic events
Road segments affected by traffic events are displayed with an alternate colour on the map,
and small symbols above the road show the nature of the event:
Tap to open the list of traffic event categories: