Alpine INE-S900R, Руководство пользователя

Страница: 98 / 151

96
-EN
Adjustment becomes necessary when the display position on the LCD
and the touch position on the touch panel do not match.
Setting item: Screen calibration
1
Touch [Adjust].
The adjustment screen appears.
2
Touch 1 [+].
[+] is displayed at the 2 position.
3
Touch 2 [+].
4
Touch [OK].
This completes adjustment, and returns to the Installation
setup mode screen.
To provide accurate guidance, the system accumulates comparative data
between the GPS signal and the vehicle speed pulse signal. You can
check the progress of accumulated data on the screen. Furthermore, you
can fine-tune the current position display. Usually, you can use the
system without any calibration. However, if the current position
generally deviates from the actually position, perform “Reset
calibration”. After performing, drive along a road with good visibility
for several tens of km to complete the auto calibration. If the movement
of the current position mark on the map deviates from the actual
movement of the vehicle even after performing the reset calibration and
auto calibration, perform the manual calibration.
Setting item: Vehicle position calibration
Setting item: Manual calibration
Setting contents: -100.0% to +600.0%
(Initial settings: -1.2%)
Setting item: Auto calibration
Setting contents: On (Initial setting) / Off
Setting item: Reset calibration
Adjusting the Touch Panel Adjusting the Vehicle position calibration
Downloaded from Caradio-Manual.com Manuals