Alpine INE-S900R, Руководство пользователя

Страница: 60 / 151

58
-EN
1
Programme type display
2
RDS indicator
Turning AF (Alternative Frequencies) On
or Off
The RDS (Radio Data System) is a radio information system using the
57 kHz subcarrier of regular FM broadcast. The RDS allows you to
receive a variety of information such as traffic information, station
names, and to automatically re-tune to a stronger transmitter that is
broadcasting the same programme.
1
Touch [AF] to select the AF (Alternative Frequency)
ON or OFF mode.
The “AF” indicator appears in the display.
• When the AF ON mode is selected, the unit automatically tunes to a
strong signal station in the AF list.
• Use the AF OFF mode when automatic re-tuning is not required.
Tips
• If the unit receives the PTY31 (Emergency Broadcast) signal, the unit
will show “Alarm” in the display only when PTY31 is set to On. For
operation, refer to “Setting PTY31 (Emergency Broadcast)
Reception” (page 110).
• The RDS digital data includes the following:
• Refer to page 110 about “PI SEEK Setting”, “Receiving RDS
Regional (Local) Stations” and “Setting PTY31 (Emergency
Broadcast) Reception”.
Receiving Traffic Information
Automatically
1
Touch [TA] to turn on the Traffic Information mode.
The TA indicator lights up.
When the traffic information station is tuned in, the TP
indicator lights up.
Traffic information is heard only when it is being broadcast.
If traffic information is not being broadcast, the unit is set in
the standby mode.
When a traffic information broadcast begins, the unit
automatically receives it and the display shows “Traffic
information”.
When traffic information broadcast is over, the unit will
automatically set to the standby mode.
• If the traffic information broadcast signal falls below a certain level,
the unit remains in the receiving mode for 1 minute. If the signal
remains below a certain level for over 70 seconds, “TA” blinks in the
display.
• If you do not want to listen to the traffic information being received,
touch [TA] to skip that traffic information message. You can also skip
it by pressing <SOURCE/PWR>.
The Traffic information mode will remain in the ON position to
receive the next traffic information message.
• If the volume level is changed while receiving traffic information, the
changed volume level will be memorized. When traffic information is
received next time, the volume level will be automatically adjusted to
the memorized level.
• If the Traffic Information mode is activated, the unit automatically
switches to radio source (even if you select another source) and
receives the traffic information broadcast. When the traffic
information is finished, the unit returns to the previous source.
Receiving Traffic Information Manually
1
Touch [TA] to turn on the Traffic Information mode.
When the traffic information station is tuned in, the TP
indicator lights up.
2
Touch [ ] or [ ].
Seeks the broadcast station which is broadcasting the
traffic information.
• You can seek the traffic information in DX Seek mode or Seek mode.
RDS Operation
PI Programme Identification
PS Programme Service Name
AF List of Alternative Frequencies
TP Traffic Programme
TA Traffic Announcement
PTY Programme Type
EON Enhanced Other Networks
2
1
Downloaded from Caradio-Manual.com Manuals