27
-EN
4
Press the
button to set ON/OFF for the selected
Announcement.
Repeat Steps 3 and 4 to set more.
5
To set the Announcement Select mode OFF, press the
T.INFO/ANNC.
button for at least 2 seconds.
NOTES
•
When one of the selections between "All Select" and
"Financial" is set ON, no announcement interrupts are made
if you set OFF for the "Announcement."
•
If you set ON/OFF with the "All Select" selection, you can set
ON/OFF for the selections from "Traffic News" to
"Financial."
Tips
•
When an urgent broadcast is received, the mode automatically
changes to the DAB mode to receive the Alarm
Announcement. If you adjust the volume level at this time,
that volume level is memorized, and that volume level is
applied the next time you receive an urgent broadcast.
•
If the announcement that you select in Step 3 interrupts, the
selected announcement Label is displayed. If you adjust the
volume level at this time, that volume level is memorized, and
that volume level is applied the next time announcement
interrupts.
Changing the Display Mode
You can display information that is sent from broad-
casting stations, such as the channel number or the
service name that you are receiving or listening.
1
While receiving DAB, press the
TITLE
button to
change the display mode.
∗
1: You can display this only when the broadcasting
station supplies the Service Component Label.
Otherwise, “NO COMPONENT” is displayed.
∗
2:
•
If you set “ON” for “Scroll Setting,” the character
information that is sent from the broadcasting
station is scrolled when it displayed.
If you are set to “OFF” while displaying the
Dynamic Label and press and hold the TITLE
button for at least 2 seconds, you can scroll the
character information once.
•
“NO SERVICE” is displayed when there is no
service, while “NO ENSEMBLE” is displayed
when there is no ensemble label.
•
“NO TEXT” is displayed when broadcasting
stations which contain no Dynamic Label are
received.
Turning ON/OFF Traffic News
Announcement
When you set to ON, you can automatically receive the
Traffic News.
1
Press the
T.INFO/ANNC.
button to set ON/OFF for the
Traffic News.
You can also set the RDS stations at the same time.
NOTE
This operation can also be performed by turning the Traffic
News ON/OFF in the "Setting the Announcement Select Mode"
section on this page.
Setting the Announcement Select
Mode
1
Press the
T.INFO/ANNC.
button for at least 2 seconds
to turn ON the Announcement Select mode.
2
Press the
or
button to select “Announcement,”
and then press the
button to set it ON.
3
After turning ON the “Announcement,” press the
or
button to select your desired Announcement.
Announcement
All Select
Traffic News
Travel News
Warning
News
Weather
Event
Special Event
Radio Info
Sports News
Financial
Ensemble Label/Service Label Display
Service Label/Component Label Display
*
1
Dynamic Label Display
*
2
