![Alpine INA-N333R Скачать руководство пользователя страница 11](http://html1.mh-extra.com/html/alpine/ina-n333r/ina-n333r_owners-manual_2907734011.webp)
9
-EN
RDS Operation
Setting RDS Reception Mode and
Receiving RDS Stations
The RDS (Radio Data System) is a radio information
system using the 57 kHz subcarrier of regular FM
broadcast. The RDS allows you to receive a variety of
information such as traffic information, station names,
and to automatically re-tune to a stronger transmitter
that is broadcasting the same programme.
1
Press the
SOURCE/POWER
button until a radio
frequency appears in the display.
2
Press the
F/SETUP
button. The "FUNC" indicator will
illuminate.
3
Press the
1/AF
button to activate the RDS mode.
The display shows the "AF" indicator when the RDS
mode is activated.
4
Press the
or
button to tune in the desired
RDS station.
5
Press the
1/AF
button to deactivate the RDS mode.
The "AF" indicator will turn off.
6
Press the
F/SETUP
button to activate the normal
mode. The "FUNC" indicator will turn off.
Tips
•
When the unit receives the PTY31 (Emergency Broadcast)
signal, the unit will show "ALARM" in the display
automatically.
•
The RDS digital data includes the followings:
PI
Programme Identification
PS
Programme Service Name
AF
List of Alternative Frequencies
TP
Traffic Programme
TA
Traffic Announcement
PTY
Programme Type
EON
Enhanced Other Networks
R.TEXT
Radio Text Information
F/SETUP 1/AF
1 through 6 buttons
MODE
Flipper switch
OK
SOURCE/
POWER
Recalling Preset RDS Stations
1
Press the
F/SETUP
button. The "FUNC" indicator will
illuminate.
2
Press the
1/AF
button to activate the RDS mode.
The display shows the "AF" indicator when the RDS
mode is activated.
3
Press the
F/SETUP
button to activate the normal
mode. The "FUNC" indicator will turn off.
4
Press the
1 through 6 buttons
in which your desired
RDS station is preset. If the preset station's signal is
weak, the unit automatically searches and tunes to a
stronger station in the AF (Alternative Frequencies) list.
5
If the preset station and the stations in the AF list
cannot be received:
When the PI SEEK setting is on (refer to "PI SEEK
Setting" on page 10), the unit searches again for a
station in the PI (Programme Identification) list.
If the signal level of the Regional (Local) station being
tuned becomes too weak to receive, press the same
preset button to tune in a Regional station in other
district.
NOTE
For presetting the RDS stations, refer to the Radio Operation
section. The RDS stations can be preset in the FM-1, FM-2 and
FM-3 bands only.
Receiving RDS Regional (Local)
Stations
1
Press and hold the
F/SETUP
button for at least 2
seconds. The display changes to the SETUP screen.
2
Move the
Flipper switch
up or down to select RDS
REGIONAL. Press the
OK
button or
MODE
knob to
set.
3
Move the
Flipper switch
up or down to select ON or
OFF. Press the
OK
button or
MODE
knob to set. The
display returns to the SETUP screen.
In the "RDS REGIONAL OFF" mode, the unit
automatically keeps receiving the related local RDS
station.
4
Press the
F/SETUP
button to deactivate the setting
mode.