Alpine INA-N333R Скачать руководство пользователя

Страница: 19 / 46

-EN

Setting the Bass Control

You can change the Bass Frequency emphasis to create
your own tonal preference.

Press the

bass engine

button to change to the bass

engine mode.

Move the

Flipper switch

up or down to select BASS

CONT. Press the

button or

MODE

knob to set the

BASS CONT. (Bass Center frequency control) mode.

3-1

Setting the bass Level:

Move the

Flipper switch

up or down to select BASS

LEVEL. Press the

button or

MODE

knob to set.

Move the

Flipper switch

up or down to select the

desired bass level (–7~+7). Press the

button or

MODE

knob to set.

You can emphasize or weaken the bass frequency.

3-2

Setting the bass Centre frequency:

Move the

Flipper switch

up or down to select BASS

FREQ. Press the

button or

MODE

knob to set.

Move the

Flipper switch

up or down to select the

desired bass centre frequency (60Hz ~ 180Hz). Press
the

button or

MODE

knob to set.

Emphasizes the displayed Bass frequency ranges.

3-3

Setting the bass Band Width (Q-Factor):

Move the

Flipper switch

up or down to select BAND

WIDTH. Press the

button or

MODE

knob to set.

Move the

Flipper switch

up or down to select the

desired bass Band Width (WIDE1 (Narrow) ~ WIDE4
(Wide)). Press the

button or

MODE

knob to set.

Changes the bass boost band width to narrow or wide. A
wide setting will boost a wide range of frequencies above
and below the centre frequency. A narrower setting will
boost only frequencies near the centre frequency.

NOTES

•

If no buttons are pressed within 10 seconds, the Bass control
setting will be turned off automatically.

•

After 10 seconds from the completion of operation, the system
returns to the normal mode automatically. By pressing the
RTN button, the display returns to the previous indication.

•

You can also press the

button instead of the

Flipper switch to select an item.

•

You can also press the

button instead of the OK button or

MODE knob to set an item.

•

The bass level settings will be individually memorized for
each source (FM, MW (LW), CD, etc.) until the setting is
changed. The bass frequency and bass band width settings
adjusted for one source are effective for all other sources
(FM, MW (LW), CD etc.).

•

Depending on the connected devices, some functions and
display indications do not work. However, bass level is still
adjustable if an audio processor with the bass adjustment is
connected.

Setting the Treble Control

You can change the Treble Frequency emphasis to
create your own tonal preference.

Press the

bass engine

button to change to the bass

engine mode.

Move the

Flipper switch

up or down to select TREBLE

CONT. Press the

button or

MODE

knob to set the

TREBLE CONT. (Treble Center frequency control)
mode.

3-1

Setting the treble Level:

Move the

Flipper switch

up or down to select TREBLE

LEVEL. Press the

button or

MODE

knob to set.

Move the

Flipper switch

up or down to select the

desired Treble level (–7~+7). Press the

button or

MODE

knob to set.

You can emphasize the treble frequency.

3-2

Setting the treble Centre frequency:

Move the

Flipper switch

up or down to select TREBLE

FREQ. Press the

button or

MODE

knob to set.

Move the

Flipper switch

up or down to select the

desired treble centre frequency (10.0kHz ~ 17.5kHz).
Press the

button or

MODE

knob to set.

Emphasizes the displayed Treble frequency ranges.

NOTES

•

If no buttons are pressed within 10 seconds, the Treble control
setting will be turned off automatically.

•

After 10 seconds from the operation is completed, the system
returns to the normal mode automatically. By pressing the
RTN button, the display returns to the previous setting
indication.

•

You can also press the

button instead of the

Flipper switch to select an item.

•

You can also press the

button instead of the OK button or

MODE knob to set an item.

•

The treble level settings will be individually memorized for
each source (FM, MW (LW), CD, etc.) until the setting is
changed. The Treble frequency settings adjusted for one
source are effective for all other sources (FM, MW (LW), CD,
etc.).

•

Depending on the connected devices, some functions and
display indications do not work. However, treble level is still
adjustable if an audio processor with the treble adjustment is
connected.