55
-EN
01GB07i109ED-i109AD.fm
ALPINE i109ED/i109AD 68-30368Z97-A (EN)
Radio Antenna Receptacle
Remote Control Output Lead (Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
Remote Control Input Lead (Brown)
Connect the external Alpine product to the remote control
output lead.
Video Input Connector (AUX INPUT) (Yellow)
Input the video.
Audio Input Connectors (AUX INPUT)
RED is right and WHITE is left input the audio.
Video Output Connector (AUX OUTPUT) (Yellow)
Output the video.
Audio Output Connectors (AUX OUTPUT)
RED is right and WHITE is left output the audio.
Direct CAMERA Input Connector
Used when the optional direct camera is connected.
CAMERA Input RCA Connector (Yellow)
Used when connecting a camera with RCA Output
Connector.
Adaptive Steering Remote G.GND (i108ED/i108AD
Only)
To adaptive steering remote control interface box.
For details about connections, consult your nearest Alpine
dealer.
Adaptive Steering Remote Control In 1 Lead (Brown/
Yellow) (i108ED/i108AD Only)
To adaptive steering remote control interface box.
For details about connections, consult your nearest Alpine
dealer.
Adaptive Steering Remote Control In 2 Lead (Brown/
Orange) (i108ED/i108AD Only)
To adaptive steering remote control interface box.
For details about connections, consult your nearest Alpine
dealer.
Steering Remote Control Interface Connector
(i109ED/i109AD Only)
To steering remote control interface box.
For details about connections, consult your nearest Alpine
dealer.
AUDIO Input Connector
Used when a portable music player,etc. is connected.
An optional adapter cable is required (standard RCA to
3.5mm mini-phono plug or 3.5mm to 3.5mm mini-phono
plug).
OBD2 GND Lead (Use for the future)
Connect to the OBD2 GND Lead of your vehicle via a OBD2
connection cable.
OBD2 TXD Lead (Use for the future)
Connect to the OBD2 TXD Lead of your vehicle via a OBD2
connection cable.
OBD2 RXD Lead (Use for the future)
Connect to the OBD2 RXD Lead of your vehicle via a OBD2
connection cable.
HDMI input Connector
Input HDMI signal, you should prepare an optional Alpine
special HDMI cable.
EXT. KEY Connector (i109ED/i109AD only)
To external Key Panel.
REM/PRE OUT Connector
USB Connector
To USB Memory or iPod/iPhone.
AUX OUT/CAMERA Connector
Power Supply Connector
MIC Input Connector (i108ED/i108AD Only)
To Microphone.
Front Output RCA Connectors
It can be used as Front Output RCA Connectors. RED is
right and WHITE is left.
Rear Output RCA Connectors
It can be used as Rear Output RCA Connectors. RED is
right and WHITE is left.
Subwoofer RCA Connectors
RED is right and WHITE is left.
RCA Extension Cable (sold separately)
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
Reverse Lead (Orange/White)
Connect to the plus side of the car’s reverse lamp. This
lamp illuminates when the transmission is shifted into
reverse (R).
With this lead properly wired, the video picture
automatically switches to the rear camera whenever the car
is put into reverse (R).
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna,
if applicable.
•
This lead should be used only for controlling the vehicle’s power
antenna. Do not use this lead to turn on an amplifier or a signal
processor, etc.
Parking Brake Lead (Yellow/Blue)
Connect this lead to the power supply side of the parking
brake switch to transmit the parking brake status signals to
this unit.
Illumination Lead (Orange)
This lead may be connected to the vehicle’s instrument
cluster illumination lead. This will allow the backlighting of
this unit to dim whenever the vehicle’s lights are turned on.
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle’s fuse
box or another unused power source which provides (+)
12V only when the ignition is turned on or in the accessory
position.
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle’s
battery.
Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
Fuse Holder (15A)
Left Rear (+) Speaker Output Lead (Green)
Left Rear (–) Speaker Output Lead (Green/Black)
Left Front (+) Speaker Output Lead (White)
Left Front (–) Speaker Output Lead (White/Black)
Right Front (–) Speaker Output Lead (Grey/Black)
Right Front (+) Speaker Output Lead (Grey)
Right Rear (–) Speaker Output Lead (Violet/Black)
Right Rear (+) Speaker Output Lead (Violet)
01GB00i109ED-i109AD.book Page 55 Tuesday, October 18, 2016 5:50 PM
