26
-EN
01GB05i109ED-i109AD.fm
ALPINE i109ED/i109AD 68-30368Z97-A (EN)
Adjusting the Band
Touch
[Band]
to select the band to be adjusted.
•
You can select a band directly by touching the screen.
Adjusting the Frequency
Touch
[
]
or
[
]
of “Freq.” to adjust the frequency of the
selected band.
Adjustable frequency bands: 20 Hz to 20 kHz (in 1/3 octave steps)
Adjusting the Level
Touch
[
]
or
[
]
of “Level” to adjust the level of selected
band.
Setting contents: -7 to +7 (Initial setting: 0)
Setting the Bandwidth
Touch
[
]
or
[
]
of “Q Adjust” to select the bandwidth.
Setting contents: Wide (Initial setting) / Medium / Narrow
2
To adjust another band, repeat step 1, and adjust all
bands.
3
To store the adjusted setting value, touch and hold
[Preset1]
,
[Preset2]
, or
[Preset3]
for at least 2
seconds.
•
Band2 and Band8 are the same as the Bass and Treble controls.
•
Settings exceeding the frequency of adjacent bands are not available.
•
While adjusting the Parametric EQ, you should consider the
frequency response of the connected speakers.
•
When the parametric EQ is adjusted, the Equalizer Presets are set to
“User” automatically.
•
When Equalizer Presets is set, the linked Parametric EQ settings are
also changed. We recommend storing Parametric EQ settings in a
Preset in advance.
•
Touch
[Flat]
to initialize all values.
•
The Parametric EQ setting can be configured when Defeat is “Off”.
Calling the Parametric EQ adjusted value
Calling the preset Parametric EQ adjusted value.
Touch
[Preset1]
,
[Preset2]
, or
[Preset3]
on the
Parametric EQ screen.
The setting stored in the Preset will be recalled.
Adjusting the Crossover Settings
(X-OVER)
Before performing the following procedures, refer to “About the
Crossover” (page 29).
Setting item: X-OVER
1
Touch
[Channel]
to select the channel.
Each time you touch, the channel switches.
2WAY System
Front HPF/Rear HPF/Subw. LPF
3WAY System
Subwoofer (LPF)/Front Low (HPF)/Front Low (LPF)/Front
High (HPF)
• If you want to switch the 2WAY/3WAY system mode, please contact
your dealer.
2
Touch [
]/[
] or [
]/[
] to adjust the desired item.
Selecting the Cut-Off Frequency (Freq.)
2WAY System
Setting contents:
Front HPF/Rear HPF/Subw. LPF
20 / 25 / 31.5 / 40 / 50 / 63 / 80 (Initial setting) / 100 / 125 / 160 /
200 (Hz)
3WAY System
Setting contents:
Subwoofer (LPF)/Front Low (HPF):
20 / 25 / 31.5 / 40 / 50 / 63 / 80 / 100 / 125 / 160 / 200 / 250 / 315 /
400 / 500 (Initial setting) / 630 / 800 (Hz)
Front Low (LPF):
20 / 25 / 31.5 / 40 / 50 / 63 / 80 / 100 / 125 / 160 / 200 / 250 / 315 /
400 / 500 / 630 / 800 / 1 k / 1.2 k / 1.6 k / 2 k / 2.5 k / 3.2 k / 4 k /
5 k (Initial setting) / 6.3 k / 8 k / 10 k / 12.5 k / 16 k / 20 k (Hz)
Front High (HPF):
1 k / 1.2 k / 1.6 k / 2 k /2.5 k / 3.2 k / 4 k / 5 k (Initial setting) / 6.3 k /
8 k / 10 k / 12.5 k / 16 k / 20 k (Hz)
• The frequency of Front Low (HPF) should not be more than the frequency of
Front Low (LPF).
Adjusting the Slope (Slope)
Setting contents:
0 / 6 / 12 / 18
*
/ 24
*
(dB/oct.)
*
Not available when “Front Low (LPF)” is selected in 3WAY System.
• The initial setting for 2WAY is 0. 3WAY is 12.
Band1
Band2
···
Band8
Band9
Band1:
20 Hz~100 Hz (63 Hz)
Band2:
63 Hz~315 Hz (125 Hz)
Band3:
125 Hz~500 Hz (250 Hz)
Band4:
250 Hz~1 kHz (500 Hz)
Band5:
500 Hz~2 kHz (1 kHz)
Band6:
1 kHz~4 kHz (2 kHz)
Band7:
2 kHz~7.2 kHz (4 kHz)
Band8:
5.8 kHz~12 kHz (8 kHz)
Band9:
9 kHz~20 kHz (16 kHz)
01GB00i109ED-i109AD.book Page 26 Tuesday, October 18, 2016 5:50 PM
