33
-EN
01GB05i109ED-i109AD.fm
ALPINE i109ED/i109AD 68-30368Z97-A (EN)
Direct Rear View Camera Operation
When an Alpine Direct Rear View Camera is connected and “Rear” is
selected in “Camera Select”, the settings below can be performed. For
more information about Alpine Direct Rear View Camera, please
consult your Alpine dealer.
Setting item: Guide Adjustment
*
* Displays only when “Camera Select” is set to “Rear”.
Switching video patterns for Rear camera
1
Touch
[Guide Adjustment]
.
The camera guide adjustment screen is displayed.
2
Touch
[Rear]
,
[Panorama]
,
[Corner]
or
[Ground]
.
The view will change to the selected view.
3
Touch
[
]
to return to the previous screen.
•
For an explanation of video patterns, see the camera Owner’s
Manual.
Adjusting the Rear Camera Guide
If you select “Rear”, you can adjust the camera guide position.
1
Touch
[Guide Adjustment]
.
The camera guide adjustment screen is displayed.
•
The camera guide is displayed only when the video pattern is set to
“Rear”.
2
Touch
[Adjust]
.
•
If
[Adjust]
does not appear, proceed to step 3.
3
Touch the guide you intend to adjust.
Guide line can also be selected by touching
[
]
[
]
.
Display example for rear camera mode
4
Touch
[ ]
,
[ ]
,
[
]
or
[
]
to adjust the position of
the guide.
•
Touching
[Clear]
clears adjustments and returns to the setting
before guide line alteration.
5
After the adjustment is completed, touch
[Set]
.
Adjusting guides simultaneously (for Rear camera
only)
1
Touch
[Link]
.
The 3 vertical guides of the currently-selected guide link
together, allowing them to be adjusted simultaneously.
Turning guide display On/Off
Turning the selected guide off.
1
Touch
[On/Off]
.
The currently selected guide will turn off.
2
To turn the guide on, touch
[On/Off]
again.
•
Guides that are turned off are still adjustable.
Returning guides to default.
1
Touch
[Default]
.
A message window will appear.
2
Touch
[OK]
.
Adjusted values will return to default settings.
The video input signal type can be chosen.
Setting item: Camera Signal
Setting contents: NTSC (Initial setting)/PAL
You can set whether to display the rear camera image when the gear
lever is moved to the reverse (R) position while the unit is turned off.
Setting item: Camera Interrupt (Power Mode)
Setting contents: On (Initial setting) /Off
Adjusting the Guide
Setting the Direct Camera Signal Input
Camera Interrupt Setting (Power Mode)
On:
The rear camera image is displayed when the gear lever
is moved to the reverse (R) position while the unit is
turned off
Off:
The rear camera image is not displayed
01GB00i109ED-i109AD.book Page 33 Tuesday, October 18, 2016 5:50 PM
