background image

5

-EN

ALPINE HCE-C200R  68-09359Z09-A (EN)

Rear Camera Operation

Turning the Rear Camera On and Off

1

Shift the gear lever to the reverse position
(reversing).

The image display of the car rear and surround
interruption depends on gear lever operation.

2

If you shift the gear lever to a position other
than reverse (reversing), the monitor returns
to the previous screen.

• Refer also to the Owner's Manual of the connected

monitor/navigation system.

• Be sure to also check behind and around the car visually.

Use the camera image to assist in showing conditions
behind and around the car.

• Depending on where the unit is installed, actual conditions

may differ from the displayed image.

• The ON/OFF switch is used to turn the front camera on/off.

How the rear camera turns on/off depends on the position
of the gear lever.

Changing the Rear Image Configuration

1

Press 

MODE

.

The image configuration changes every time

MODE

 is pressed.

Panorama View:

Displays a general perspective of what is behind
the car. Use this when you want to check mainly
behind the car.

Rear View:

Displays what is behind the car. Use this when
reversing into a parking space, for example.

Top View:

Displays an image from above down to the lower
section of the car. Use this when to determine the
car's position in relation to the curb, etc.

Corner View:

Displays a divided image left and right of centre.
Use this mainly when checking the left and right
directional view.

Panorama View

Rear View

Top View

Corner View

Содержание HCE-C200F


















Отзывы: