Alpine HCE-C200F, Руководство пользователя

Страница: 15 / 17

14
-EN
ALPINE HCE-C200R 68-09359Z09-A (EN)
Angle adjustment screw
Confirmation
1
Securing leads, etc.
Make sure leads are not pinched by moving parts
such as the seat rail, etc. Also check for damaged
from sharp edges or protrusion.
Refer to "Securing the Camera Cable." (page 8, 9)
2
Connect the battery (
−
) terminal.
3
Turn on the engine key. Make sure the unit is
operating correctly by referring to the
Owner’s Manual.
4
Adjust the camera angle.
Refer to "Adjusting the Camera Angle."
5
Make sure all factory components such as
the brake lamps, etc. work correctly.
Adjusting the Camera Angle
Caution
When adjusting the camera angle, do so after
turning off the engine and applying the hand
brake to avoid an accident.
1
Put the gear shift into reverse (R) or press
ON/OFF
, and check the image from the
camera on the display.
When you set the corner view, adjust the angle so
that the road may be roughly viewed horizontally.
2
Loosen the camera mounting
3
and angle
adjustment screw. Determine the camera
angle, and carefully tighten the angle
adjustment screw.