Alpine DVI-9990, Руководство пользователя

Страница: 63 / 121

55
-
EN
○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○
Supplement
See page 57 for supplementary information.
Manual Storing of Station Presets
1
Select the radio band and tune in a desired radio station you wish to store in
the preset memory.
2
When the FUNC indicator is red, press and hold for at least 2 seconds, one
of
Preset buttons (1 through 6) into which you want to store the station. The
selected station is stored.
The display shows the band, preset No. and station frequency memorized.
• Press F
•
SETUP when the FUNC indicator lights up blue or green, and perform the
operation after the indicator switches red.
• If you store a station in a preset memory which already has a station, the current station will
be cleared and replaced with the new station.
Supplement
See page 57 for supplementary information.
The following operation is performed from the main unit.
• Only SEEK tuning can be
allowed by remote control
operation.
3
Press repeatedly until the desired tuning mode.
Distance mode:
Both strong and weak stations will be automatically
tuned in (Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in
(Automatic Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual
tuning).
• The initial mode is DX SEEK.
4
Press or to move downward or upward
one step respectively until the desired station
frequency is displayed.
• The ST indicator appears on the display when a Stereo
FM station is tuned in.
DX SEEK (Distance mode)
OFF (Manual mode)
SEEK (Local mode)