Alpine DVI-9990, Руководство пользователя

Страница: 19 / 121

11
-
EN
Initial System Start-Up
Make sure that the Power is turned off. When the power is on, press and hold SOURCE/
POWER for at least 3 seconds to turn off the power.
Immediately after installing or applying power to the unit, it should be initialized. To do this,
first, remove the detachable front panel. Behind the front panel, to the right of the connec-
tor, there is a small hole.
Using a ball-point pen or other pointed object, press the reset switch mounted behind this
hole to complete the initialization procedure.
RESET switch
Turning Power On or Off
The power of the DVI-9990 cannot be switched on unless the Multimedia Manager (PXI-
H990), sold separately, or a DAC unit (DAI-C990), sold separately, is connected.
Refer to the user manual supplied with the PXI-H990 for operating the separately sold
multi media manager (PXI-H990).
1
Press SOURCE/POWER to turn on the unit.
• The unit can be turned on by pressing any other button
except and TITLE , .
• “AUDIO PROCESSOR SETTING” appears on the
front panel of the main unit at Power ON, source
switching, disc reading operation or when changing a
sampling rate for MP3/WMA or DVD audio disc.
During appearing the message, all operations except
for Power ON/OFF or SOURCE switching operation
cannot be allowed. After disappearing the message,
perform the operation.
The volume level gradually increases to the
previous level you were listening to before the unit
was turned off. Press and hold
SOURCE/
POWER
for at least 3 seconds to turn off the unit.
○○○○
○○○○○○○○○○○○○○○○○○○