9
-EN
Listening to Radio
1
Press
SOURCE
to select TUNER mode.
2
Press
BAND
repeatedly until the desired radio band is
displayed.
F1 (FM1)
F2 (FM2)
AM
F1 (FM1)
3
Press
TUNE
A.ME
to select the tuning mode.
r
(Distance mode)
t
(Local mode)
off (Manual mode)
r
Note
• The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press
or
to tune in the desired station.
Holding down
or
will change the frequency
continuously.
Presetting Stations Manually
1
Select the radio band and tune in a desired radio station
you wish to store in the preset memory.
2
Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6)
into which you wish to store
the station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
Notes
• A total of 18 stations can be stored in the preset memory (6 stations for
each band; FM1, FM2 and AM).
• If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
Presetting Stations Automatically
1
Press
BAND
repeatedly until the desired radio band is
displayed.
2
Press and hold
TUNE
A.ME
for at least 2 seconds.
The frequency on the display continues to change while the
automatic memory is in progress. The tuner will automatically
seek and store 6 strong stations in the selected band. They will
be stored into preset buttons 1 to 6 in order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
Note
• If no stations are stored, the tuner will return to the original station you
were listening to before the auto memory procedure began.
Tuning to Preset Stations
1
Press
BAND
repeatedly until the desired band is
displayed.
2
Press any one of the station
preset buttons (1 through 6)
that has your desired radio station in memory.
The display shows the band, preset number and frequency of
the station selected.
Frequency Search Function
You can search for a radio station by its frequency.
1
Press
ENTER
in Radio mode to activate Frequency
search mode.
The “
” indicator lights up.
2
Turn the
Rotary encoder
to select the desired frequency.
3
Press
ENTER
to receive the selected frequency.
Note
• Press
r
in the search mode to cancel. Or, the search mode will be
cancelled if no operation is performed for 10 seconds.
Radio
BAND
/ENTER
SOURCE/
TUNE/A.ME
Rotary encoder
Preset buttons
(1 through 6)
00ALPINE.book Page 9 Friday, October 12, 2012 3:21 PM
