35
-EN
Indication for CD Changer
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature
returns to within operation range.
• Malfunction in the CD Changer.
- Consult your Alpine dealer. Press the magazine eject
button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your
Alpine dealer.
• Magazine ejection not possible.
- Press the magagine eject button. If the magazine does
not eject, consult your Alpine dealer.
• A disc is left inside the CD Changer.
- Press the Eject button to activate the eject function.
When the CD Changer finishes the eject function,
insert an empty CD magazine into the CD Changer
to receive the disc left inside the CD Changer.
• No magazine is loaded into the CD Changer.
- Insert a magazine.
• No indicated disc.
- Choose another disc.
Indication for CD Player
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature
returns to within operation range.
• No CD is inserted.
- Insert a CD.
• Although a disc is inserted, “T-- ---” is displayed
and the unit does not start to play or eject the disc.
- Remove the disc by following these steps:
1) Press the
c
button.
The movable display will open.
2) Press the
c
button again for at least 3 seconds while
the movable display is open.
• Mechanism error.
1) Press the
c
button and eject the CD.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting,
press the
c
button again.
If the error indication still does not turn off after
pressing the
c
button for a few times, consult your
Alpine dealer.
NOTE
When the “ERROR” is displayed:
In case that the disc connot be ejected by pressing the
c
button, press the RESET switch (refer to page 5) and
press the
c
button again.
If not ejecting, consult your Alpine dealer.
HI TEMP
T– – – – –
ERROR
HI TEMP
ERROR - 01
ERROR - 02
NO MAGZN
NO DISC
Содержание CDA-7873R
Страница 44: ...42 EN...
