Alpine CDA-7873R, Руководство пользователя

Страница: 27 / 44

25
-EN
CD
5
Repeat the steps 3 and 4 above to complete the
titling. Pressing the MODE (Audio Control) knob
after entering the eighth character, automatically
stores the title into memory.
When entering a title of less than 8 characters
(for example, 3 character title):
After entering 3 characters to complete your title,
the 4th character space will be blinking. Go to
step 6 to complete the title.
6
Press and hold the TITLE button for at least 3
seconds to record the title.
NOTES
•
The memory capacity for the disc titles is 18. If you try
to store beyond the limit, the display will show "FULL
DATA." At this point, no more titles can be stored.
•
To input a new title, one of the previously inputted
titles must first be deleted.
•
When you want to erase a title, enter the " " symbol
into all spaces.
•
The CD Changer title length or memory capacity
varies depending upon the model being used.
•
Removing power from the unit may delete these titles.
Use caution when manipulating the power cord.
Erasing Disc Title
1
Press the TITLE button to select the disc titling
mode. Then, press and hold for at least 3
seconds.
2
Press and hold the - / J button for at least 2
seconds to activate the title scanning mode. The
title in the display will blink.
3
Press the g DN or f UP button repeatedly
until the disc title you want to erase is displayed.
4
Press and hold the - / J button for at least 2
seconds to erase the disc title displayed.
5
Press and hold the TITLE button for at least 3
seconds to cancel the disc title erasing mode.
NOTE
You cannot erase CD-TEXT.
CD Text Scroll Setting
This CD player has the ability to scroll the disc
and track name recorded on CD-Text discs. The
scrolling feature will work with names greater than
8 characters.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the
f
UP button repeatedly to select
"SCR".
Each press of the
f
UP button changes the
modes as shown:
∗
CDA-7873R/TDA-7587R Only
NOTE
If you press the
g
DN button the display scrolls in
reverse sequence.
3
Press the TUNE button to toggle mode between
SCR AUTO and MANU.
•
SCROLL AUTO: the display of CD text is
scrolled continuously.
•
SCROLL MANUAL: the display is scrolled only
when a disc is loaded or when a track is
changed.
4
When the setting is completed, press the SETUP
button to return to the normal mode.
NOTES
•
Initial mode is "SCR MANU."
•
The unit scrolls only CD text names. The disc titles
input manually (refer to page 24) cannot be scrolled.
→
FM-LV
→
REG
→
PTY31
→
HI-FI/NORMAL/STABLE
→
AMBER
∗
DEMO
←
AUX
←
SCR
←
MUTE
←
BEEP
←
SUB
←
DIM
←