Alpine CDA-137EBT Скачать руководство пользователя страница 49

Страница: 49 / 56

Installation and Connections

WARNING

PRECAUTIONS

Before installing or connecting the unit, please read the following and

refer to “Operating Instructions” on page 3 for proper use.

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or product

damage.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP

METAL EDGE.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may

result in fire, etc.

IMPORTANT

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING

OBJECTS.

Arrange wiring and cables in compliance with the manual to prevent

obstructions when driving. Cables or wiring that obstruct or hang

up on places such as the steering wheel, shift lever, brake pedals, etc.

can be extremely hazardous.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY

TERMINAL.

Failure to do so may result in electric shock or injury due to

electrical shorts.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other equipment.

Doing so will exceed the current carrying capacity of the wire and

result in fire or electric shock.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions

so as not to contact, damage or obstruct pipes, fuel lines, tanks or

electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO

MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any

other safety-related system), or tanks should NEVER be used for

installations or ground connections. Using such parts could disable

control of the vehicle and cause fire etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF

CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a

physician immediately.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE

OPERATION, SUCH AS THE STEERING WHEEL OR SHIFT LEVER.

Doing so may obstruct forward vision or hamper movement etc. and

results in serious accident.

Be sure to use only the specified accessory parts. Use of other than

designated parts may damage this unit internally or may not securely

install the unit in place. This may cause parts to become loose

resulting in hazards or product failure.

Route the cables and wiring away from moving parts (like the seat

rails) or sharp or pointed edges. This will prevent crimping and

damage to the wiring. If wiring passes through a hole in metal, use

a rubber grommet to prevent the wire’s insulation from being cut by

the metal edge of the hole.

Avoid installing the unit in locations with high incidence of moisture

or dust. Moisture or dust that penetrates into this unit may result in

product failure.

CAUTION

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

The wiring and installation of this unit requires special technical skill

and experience. To ensure safety, always contact the dealer where

you purchased this product to have the work done.

•

Be sure to disconnect the cable from the (-) battery post before

installing your CDA-137EBT. This will reduce any chance of damage to

the unit in case of a short-circuit.

Be sure to connect the colour coded leads according to the diagram.

Incorrect connections may cause the unit to malfunction or damage to

the vehicle's electrical system

When making connections to the vehicle's electrical system, be aware

of the factory installed components (e.g. on-board computer). Do not

tap into these leads to provide power for this unit. When connecting

the CDA-137EBT to the fuse box, make sure the fuse for the intended

circuit of the CDA-137EBT has the appropriate amperage. Failure to do

so may result in damage to the unit and/or the vehicle. When in doubt,

consult your Alpine dealer.

The CDA-137EBT uses female RCA-type jacks for connection to other

units (e.g. amplifier) having RCA connectors. You may need an adaptor

to connect other units. If so, please contact your authorized Alpine

dealer for assistance.

Be sure to connect the speaker (-) leads to the speaker (-) terminal.

Never connect left and right channel speaker cables to each other or to

the vehicle body.

Please record the serial number of your unit in the space provided

below and keep it as a permanent record. The serial number or the

engraved serial number is located on the bottom of the unit.

SERIAL NUMBER: [ ]

INSTALLATION DATE: [ ]

INSTALLATION TECHNICIAN: [ ]

PLACE OF PURCHASE: [ ]

-EN

Содержание CDA-137EBT

























































Результаты поиска

Содержание CDA-137EBT

Отзывы:

Похожие инструкции для CDA-137EBT

Бренды по названию

Популярные бренды

Alpine CDA-137EBT, Руководство пользователя

Результаты поиска

Содержание CDA-137EBT

Отзывы:

Похожие инструкции для CDA-137EBT

Бренды по названию

Популярные бренды