Alpine CDA-137EBT Скачать руководство пользователя страница 45

Страница: 45 / 56

This unit may be controlled from the vehicle's audio controls. An

optional Alpine Remote Control Interface Box must be used. For details,

contact your Alpine dealer.

Connectable to Remote Control Interface Box

In Case of Difficulty

If you encounter a problem, please turn the power off, then on again. If

the unit is still not functioning normally, please review the items in the

following checklist. This guide will help you isolate the problem if the

unit is at fault. Otherwise, make sure the rest of your system is properly

connected or consult your authorized Alpine dealer.

•

Vehicle’s ignition is off.

No antenna or open connection in cable.

Out of operating temperature range +50°C (+120°F) for CD.

Moisture condensation in the CD Module.

A CD is already in the CD player.

You are in a weak signal area.

The antenna may not be the proper length.

If the area you are in is a primary signal area, the antenna may not be

grounded and connected properly.

The antenna is not the proper length.

The antenna is poorly grounded.

Improper power lead (Red) and battery lead (Yellow) connections.

Blown fuse.

Internal micro-computer malfunctioned due to interference noise

etc.

If connected following instructions, the unit will not operate with

the vehicle’s ignition off.

Make sure the antenna is properly connected;

replace the antenna or cable if necessary.

Allow the vehicle’s interior (or trunk) temperature to cool.

Allow enough time for the condensation to evaporate (about 1

hour).

Eject the CD and remove it.

Make sure the tuner is in the DX mode.

Check your antenna connections; make sure the antenna is

properly grounded at its mounting location.

Make sure the antenna is fully extended; if broken, replace the

antenna with a new one.

Extend the antenna fully; replace it if it is broken.

Make sure the antenna is grounded properly at its mounting

location.

Check power lead and battery lead connections.

Check the fuse of the unit; replace with the proper value if

necessary.

Press the

RESET

button with a ballpoint pen or other pointed

article.

Information

Basic

Radio

No function or display.

Unable to receive stations.

CD Player not functioning.

CD playback sound is wavering.

CD insertion not possible.

Unable to tune stations in the seek mode.

Broadcast is noisy.

-EN

Содержание CDA-137EBT

























































Результаты поиска

Содержание CDA-137EBT

Отзывы:

Похожие инструкции для CDA-137EBT

Бренды по названию

Популярные бренды

Alpine CDA-137EBT, Руководство пользователя

Результаты поиска

Содержание CDA-137EBT

Отзывы:

Похожие инструкции для CDA-137EBT

Бренды по названию

Популярные бренды