*
You can change the AUX Name display when AUX IN is set to
ON. Press
s
/ENTER
when AUX IN is set to ON, and select AUX
Name by turning the Rotary encoder, then press
s
/ENTER
. After
that, turn the Rotary encoder to select the desired AUX Name.
Display is selected on the setup main menu in step 2.
You can change the lighting colour of the unit's buttons.
Set the Dimmer Control to Auto to decrease the illumination brightness
of the unit with the head lights of the vehicle ON.This mode is useful if
you fell the unit's backlighting is too bright at night.
In the Dimmer Level setting, three levels are available, the highest level
(Lev3) being the dimmest when the car headlights are on.
Setting item:
Illumination
Setting item:
Dimmer
Setting item:
Dimmer Level
e
e
e
Setting contents:
TYPE1 (Initial setting) / TYPE2 / TYPE3
Setting contents:
Auto(lnitial setting)/Manual
Setting contents:
Lev1 (Initial setting) / Lev2 / Lev3
Display Setting
Changing Lighting Colour
Dimmer Control
Dimmer Level Setting
Note
•
Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press
SOURCE/
a
to select AUX mode and then
press
BAND
to select your desired device.
OFF:
When set to OFF, AUX source cannot be selected.
ON* :
Set to ON when a portable device is connected. If
SOURCE/
a
is
pressed and AUX is selected, the sound of the portable device is
input to the unit.
OFF:
Use this mode when the line output of this unit is used to drive an
external amplifier. In this setting, the head unit's internal amplifier
is turned OFF and can not drive speakers.
ON :
The speakers are driven by the built-in amplifier.
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
Connecting to an External Amplifier
Setting item:
Power IC
e
Setting contents:
OFF / ON (Initial setting)
Front
Left
Front
Right
Rear
Left
Rear
Right
POWER IC OFF:
Speakers
SPEAKER
RIGHT FRONT
Front
Right
SPEAKER
RIGHT REAR
Rear
Right
SPEAKER
LEFT REAR
Rear
Left
SPEAKER
LEFT FRONT
Front
Left
POWER IC ON:
Note
•
No sound is produced by the system when the Power IC is set to OFF
This unit has a demonstration feature for the display.
Demonstration
Setting item:
Demo
e
Setting contents:
OFF (Initial setting) / ON
Note
•
To quit Demo mode, set to Demo OFF.
TYPE 1 :
When the colour of
SOURCE/
a
is blue, the colour of the other is
blue.
TYPE 2 :
When the colour of
SOURCE/
a
is blue, the colour of the other is
red.
TYPE 3 :
When the colour of
SOURCE/
a
is red, the colour of the other is
red.
19
-EN
